Having a chassis that has a large cooling capacity is very important and for all those who want to have their hardware well cooled at the same time as having it illuminated by RGB. For these users, Nox has presented the Nox Hummer TGX Rainbow chassis, a solution for those who want a chassis with capacity for a large number of fans, which have our components perfectly cooled by fans with RGB LED lighting.
The Nox Hummer TGX Rainbow is the evolution of the Hummer TGC. The main modification resides in the fans, which have RGB LED lighting with a rainbow effect, which allows a synchronization of the colors from one fan to the other, in a fluid way.
[irp]Table of Contents
Features Nox Hummer TGX Rainbow
It has been developed to support all types of motherboards, specifically E-ATX, ATX, micro-ATX and mini-ITX format plates, being able to mount high performance and performance systems that we want to be well cooled. It also has tempered glass side panels, which allows you to see all the hardware of our system. Additionally, it has a front panel also with a sheet of tempered glass so that you can see the effect that the fans make on said front panel. The air at this point is taken from the side openings and from the lower area, so the air intake will be constant and fluid.
We can see on the front panel three interconnected fans that simulate a rainbow effect, which allows us to see how the colors are transferred from one fan to the other. It should be noted that the three fans that we can find on the front are 140mm, not 120mm, which would be normal, so the cooling capacity increases. We can change them for three 120mm fans or change it for a liquid cooling system with three fans of maximum 420mm in length, which is a true pass and that few chassis offer.
The upper zone of the Nox Hummer TGX Rainbow is also optimized for cooling. This area implements a grid for the dust, so the entrance of the same towards the interior will be reduced significantly. This space has room for a maximum of three fans, admitting 120 / 140mm fans. or a liquid cooling system with block that admits up to three fans with a maximum length of 420mm, One pass.
Airflow Nox Hummer TGX Rainbow
But there is more and that is that in the rear area we find a 140mm fan installed, not admitting larger or smaller fans, in this case, but admitting liquid cooling of a single 140mm fan. Finally, the chassis admits two more fans that can be 120 / 140mm, which are located directly on the area of the motherboard, something quite atypical and that can generate a quite significant air vortex.
We are talking about a chassis that supports most of the motherboards on the market, also supporting heatsink up to 175mm in height and graphics cards with a maximum length of 430mm, which means that it supports all the hardware that we can find in the market without major problems. In addition to being possible to install two radiators of up to 420mm, which is beastly and additionally, we can install a 140mm one in the rear, come on, the space for components offered by this brutal chassis that supports up to nine 140mm fans is crazy. Never seen.
Segmentation Nox Hummer TGX Rainbow
The power supply is hidden at the bottom, with a standoff that isolates it from the rest of the chassis. We can find at this point also space for three 3.5-inch hard drives, of which two of these can house two 2.5-inch mechanical hard drives. We find in the back area, where all the cabling will be hidden, space for a total of six 2.5-inch SSDs. No, it is not a joke, actually this chassis has the capacity to support six SSDs and three mechanical hard drives or eight SSDs and a mechanical hard drive, always according to the consumer's taste.
Additionally, regarding the rest of the characteristics, we must bear in mind that this chassis is made of 0.9mm SPCC steel and the tempered glass panels are 4mm thick. The front panel, where the connectivity is, has two USB 2.0 ports and two other USB 3.0 ports, microphone input and sound output via jack connector. It also has a controller for the LEDs and speed control of the fans themselves.
The Nox Hammer TGX Rainbow allows you to install two radiators of a maximum of 420mm, which integrate three 140mm fans, so we can choose to overclock our system if we have a large cooling system and in this system we can install a large kit of cooling to take the hardware of our equipment further.
Gallery
Conclusion
The conclusions about this Nox Hummer TGX Rainbow chassis are quite clear and it is that we are facing one of the best chassis that we can find in the market, without a doubt. Provide space for up to nine fans, support motherboards up to E-ATX formats, high-height heatsinks and long-length graphics cards.
We are talking about the needs of having a great cooling system and this chassis would comply with everything that has been said to date and more, since it is capable of creating significant air flows that will lower the interior temperature by several degrees. We also find it interesting that this chassis has the capacity to house a large number of hard drives, both mechanical and SSD, especially the latter, since it supports six exclusively and additionally two of the systems for mechanical hard drives allow installing an SSD.
 | 
|
