Error 0xc00000e on Windows 10 and Windows 11 is actually a failure due to missing updates or a bad boot sector when loading the operating system. Appears if the boot configuration data has been corrupted. We are going to explain step by step everything that this error 0xc0000e means and how it can be repaired and solved, with several steps to follow.
Table of Contents
Why does error 0xc00000e occur?
Error 0xc00000e occurs when Windows starts when you turn on the computer, and some of the boot data is either damaged or misconfigured. This can happen when you clone the disk to the change hard drive or SSD to keep all files and settings. It is also possible that boot data may be corrupted and the error may occur if there is a power outage during a software update or installation.
It can also be caused by write errors to the storage, which would indicate that the storage is corrupted. Another option may be due to the action of a virus or marlware, which would indicate that we must perform a system analysis to try to eliminate it and improve security. The last option is for boot configuration errors by manually changing them in the BIOS.
Ways to fix error 0xc00000e in Windows
Verify connections to physical devices
It is possible that when you turn on the computer, it is connected a storage device that has a higher boot priority than that of the hard drive. When this happens, the motherboard takes over the boot system of the connected device, which, since it does not have the complete operating system, cannot load it and that is why error 0xc00000e occurs in Windows.
To check if this is the problem, remove any external storage devices, such as pen drives or external hard drives. To detect if this was the problem, remove each device and restart the PC one by one to check if this was the cause of the error. You can check the boot priority of connected devices by looking in the motherboard BIOS.
Rebuild Windows BCD Boot File
The BCD boot configuration data file contains the data for Windows boot configuration, and if it is corrupted, error 0xc00000e occurs. To rebuild the BCD boot file, you have to create a bootable media from an ISO and connect it to your PC. Below we explain the steps to follow:
- Access System Settings from the Windows Start screen with a Windows bootable USB to use the Repair PC option.
- Select the option of «Solve problems", not the Install one, because the problem does not require reinstalling Windows.
- In the Advanced Options screen, choose the “Command Prompt” option with the C:/ icon.
- At the system console, type “bootrec.exe,” which will bring up the four options available for this tool. Enter the following commands in order, waiting for each to resolve before entering the next.
-«/FixMbr»
-«/FoxBoot»
-«ScanOs»
-«/RebuildBcd» - Exit and restart your PC to check if it has been repaired.
Use Windows Automatic Repair Tool for Error 0xc00000e
If you have a storage drive with a Windows 10 or 11 image, you can use the Windows Error Repair Tool to fix error 0xc00000e. To do this, follow the following steps:
- Open the Start Menu and type Settings. In that menu, choose the Update and Security option.
- On the left side, you will see two recovery options. To fix Windows error 0xc00000e, choose the Restart Now option from the Advanced Startup part.
- After the PC has restarted, in the Advanced menu, choose the option “Solve problems", and then "Advanced Options«.
- Click on the «Home Repair«.
- When the process is complete, click “Continue” and Windows will finish restarting.
How to Check BIOS to Fix Windows Error 0xc00000e
In the event that the Windows error 0xc00000e is due to poor manual configuration of the BIOS, you will have to access its configuration. One way is to turn on the computer and quickly press the BIOS access button. Each manufacturer and even model has its own, and because with SSDs the operating system is loaded in seconds, look for your motherboard model to find the button that gives access to the BIOS.
Once you are in the BIOS, look through the menus for the option to restore default BIOS settings. Normally, motherboards save a base startup configuration in the event that a user has changed settings and they fail, so that the configuration can be quickly recovered. Once you have chosen the default motherboard BIOS settings, save the settings, exit the BIOS, and restart the PC.
Last option: reinstall Windows to fix error 0xc0000e
To fix Windows 0 and 00000 error 10xc11e, if you have done the previous options and they do not work, the last option is to reinstall Windows. If you can, back up your data and files. This would apply to the data that is on the boot disk, so if your PC has files, images, videos and programs stored on secondary storage drives, it will not be necessary. But it will still be advisable to make a backup copy of files that cannot be downloaded again, as a precaution.
Learn how format and reinstall windows
