ArticlesCryptocurrencies

CCMINER optimized for Lyra2rev2 protocol to mine MonaCoin and Vertcoin + 15% hashrate

We officially launched our first miner, in this case a CCminer based on version 2.2.2 of TPRUVOT optimized for the Lyra2rev2 protocol, with which we can mine MonaCoin and Vertcoin with NVIDIA graphics.

Today we bring you a great news for the users who follow us for cryptocurrency mining, in this case, we bring you the first miner that we have optimized for cryptocurrency mining. We have debugged CCminer based on the TVruvot 2.2 version, especially for NVIDIA CUDA 8. The miner that we have optimized has been debugged for Lyra2rev2, so we can mine MonaCoin and Vertcoin, two consolidated and future cryptocurrencies, which can give us excellent performance .

The adjustments made in the code, allows a performance improvement of 15% compared to other versions and also has reduced the latency in the shipments by 8%, with which the total performance of our miner is much higher than other solutions that can be found on the web and something very important, being an open source miner, it does not have any type of fee, since it would be quite ugly for us to implement a fee.

MonaCoin, on November 21 had a value of approximately $ 3 and right now it is trading over $ 15, multiplying its value by five, although it has been at its maximum peak above $ 19, which is a very important increase of value. This cryptocurrency has also gone from the 166 million dollars of market capitalization to the current 828 million dollars, approximately, although its highest peak has been more than 1.110 million dollars.

Vertcoin, on the other hand, has gone from moving between $ 3.5-4.5, to $ 7 today, although it has reached $ 10 for each of the cryptocurrencies. It has not risen as much as MonaCoin, but next year it could see a significant rise, if the project continues its course. Regarding the market capitalization, it has gone from 170-180 million dollars to the current 305 million dollars, which is almost double, although the maximum peak has been more than 430 million dollars.

Right now we do not advise anyone to mine under NiceHash due to the current problems of the company, but there are many solutions, for example for MonaCoin we have Suprnova.cc, a pool that we use a lot and that is very good. We must emphasize that this miner has been optimized for NVIDIA, as we highlighted at the beginning. We also want to emphasize that we have not implemented any type of fee and if you like the miner and want us to upload more improved and optimized miners, you can help us, contributing your grain of sand so that we can do it with more miners.


ASSAULT VIDEO OF HOW TO SET IT



TPRUVOT 2.2 VERSION OF CCMINER



RAIDER VERSION WITH 15% MORE EFFICIENCY


NOTICE: This CCMINER is best used for LYRA2REV2 only as much of the code in this fantastic miner for other protocols and currencies has been erased in part to improve single protocol mining. We have also kept the Copyright of TPRUVOT as it is only a FORK of their fantastic work.

DOWNLOAD LINK:   CCMINER MOD ASSAULTORS FOR Lyra2REv2

IF YOU LIKE IT AND YOU WANT MORE COMMENT AND SHARE IT, that will help us to release new versions

 

Show more

Robert Sole

Director of Contents and Writing of this same website, technician in renewable energy generation systems and low voltage electrical technician. I work in front of a PC, in my free time I am in front of a PC and when I leave the house I am glued to the screen of my smartphone. Every morning when I wake up I walk across the Stargate to make some coffee and start watching YouTube videos. I once saw a dragon ... or was it a Dragonite?

Related publications

53 comments

      1. Yes. Basically you would spend about 50 cents a day on light, if you adjust the power limit a little and optimize you can reduce it much more and have more benefit.

      1. That will depend on how you have it set, it may have a power limit or less OC or that it has the lowest fans and is hotter etc.

      2. I have it with the Power Limit at 65%. At 100% it gives more MH / s, but it does not compensate me for the energy expenditure.

  1. hello ... I had to deactivate windows defender ... because I detect it as a trojan ... but the increase is noticeable, it goes from mining 115Mhs to 135Mhs

    1. It usually happens, it has happened to me with the Bitcoin Gold and LBRY miner, it is deactivated or an exception is added and that's it.

  2. Very good Raider, here is my two cents as a thank you.
    Confirmed that it works and went from 94/96 MH / s with a 1080ti and a 1080 to have 109/110 MH / S
    THANKS FOR THE CURRO!

  3. hello how do you charge money? I am from Chile I like your videos but you can talk about that, greetings from the other continent

      1. So why when I mine, it doesn't fluctuate? It fluctuates between 3 and 5%, but with this it is between 30 and 50%.
        Thanks for the reply

  4. Assailant, I downloaded your configuration and my 1080 you does not rise from 63.: What is what is happening ?. You are crack. A hug.

  5. Does anyone know if it has a version for ehtereum? Another thing, can you use 2 purses and divide the profit? And finally, which pool do you think is the best for mining ethereum? thanks.

    1. We do not have a version for Ethereum at the moment. Winning cannot be split between two purses. I use suprnova.cc a lot to mine various currencies, Ethereum does not mine it, but it is a good option

  6. Is it normal that with a 1060 6gb in a few hours I only get 25mh / s? is the zotac AMP! 6gb.
    You can pass a miner for bytecoin, configured for suprnova.cc please

  7. Good, excellent performance with a 1060GTX it goes to 25MH but it is normal that the cpu processor goes to 100% it is heating up in a way that it did not before and in theory it should only pull the GPU and not the CPU as well.

    1. A little more impact on the CPU is normal, watch out just a little basically because under cuda 8 something more recxive but it is not normal that it is 100% check in the task manager if it is the ccminer that eats the cpu

  8. good I tried to do it and after creating the account in Suprnova and configuring it, it puts me
    [2017-12-26 18:41:56] Stratum authentication failed

    Does anyone know what I'm doing wrong?

Leave your comment

Your email address will not be published. Required fields are marked with *

Button back to top
Close

Ad blocker detected

This site is financed through the use of advertising, we always ensure that it is not too intrusive for the reader and we prioritize the reader's experience on the web. But if you block ads, some of our funding will be reduced.