Good afternoon, I open this thread to let all of us who have decided to open our node at home know us.
So, without further ado, I begin.

To start with, I saw an opportunity to reuse an old tower and its (crappy) 500w Llink power supply, so I jumped in the pool.
HARDWARE:
- Board: Asrock J4105-ITX (4 cores)
- Processor: included on board.
- RAM: HyperX Impact 8GB SO-DIMM 2400
- SSD: ADATA 240GB (reused from a semi-abandoned laptop).
- HDD: Seagate Barracuda 2TB (actual 1.81TB)
- (Shabby) Tower and (shabby) Fountain rescued from old PCs but in good condition and that had little war.
NOTE: I will change the source when it reaches 8-10 months of operation if everything continues well.

SOFTWARE:
I have installed a normal windows 10, I have not seen the need to install an optimized one.
So that the PC clock is always on time, I have installed "Network Time Synchronization".
NO-IP configured on Livebox (Orange router).
TightVNC Server to control the PC remotely and thus have it only connected by electrical network and ethernet.
OpenHardwareMonitor to see load peaks of cpu, memory and temperatures.

FIREWALLS:
Port forward of STORJ and VNC to the ip of my server, changed the internal port to give a little security to the matter.
Enable exception in windows firewall: New-NetFirewallRule -DisplayName "Storj v3" -Direction Inbound -Protocol TCP -LocalPort XXXXX -Action allow

Who else got excited? Later I'll put a photo of how the node is placed.