Sharkoon announces the ATX TK5M RGB case with powerful airflow

Benjamin Rosa 31 May 2022

0 677 2 reading minutes

[#Beginning of Shooting Data Section] Image Size:S (3680 x 2456), FX 2022/01/21 12:33:47.28 Time Zone and Date:UTC+1, DST:OFF Tiff-RGB (8-bit) Nikon D810 Lens:24-120mm f/3.5-5.6D Focal Length:52mm Focus Mode:Manual AF-Area Mode:Single VR: AF Fine Tune:OFF Aperture:f/25 Shutter Speed:1/60s Exposure Mode:Manual Exposure Comp .:0EV Exposure Tuning: Metering:Center-Weighted ISO Sensitivity:ISO 64 Device: White Balance:Direct sunlight, B0.50, G0.50 Color Space:Adobe RGB High ISO NR:ON (High) Long Exposure NR:OFF Active D-Lighting:OFF Image Authentication: Vignette Control:Normal Auto Distortion Control:ON Picture Control:[SD] STANDARD Base:[SD] STANDARD Quick Adjust:- Sharpening:7.00 Clarity:0.00 Contrast:0.00 Brightness:0.00 Saturation:+1.00 Hue:0.00 Filter Effects: Toning: Optimize Image: Color Mode: Tone Comp.: Hue Adjustment: Saturation: Sharpening: Latitude: Longitude: Altitude: Altitude Reference: Heading: UTC: Map Datum: [#End of Shooting Data Section]

Component manufacturer and supplier Sharkoon Technologies has announced the addition of the new TK5M RGB ATX case to its product line. Its mesh front panel, four pre-installed 120mm fans, and fast USB-C port make this compact ATX case an ideal model for users seeking ease of use, affordability, and high performance.

This ATX case focuses on providing well-designed airflow . At the heart of this airflow is the combination of an air-permeable mesh front panel and four pre-installed, addressable 120mm RGB fans. Three of these fans provide optimized airflow behind the front panel, while the fourth exhausts hot air from the rear of the case. For even greater airflow, two additional 120mm fans or two larger 140mm fans can be installed under the top panel to further expel stale air.

A great case with great airflow and at a good price

Another feature of the box is its fast and hassle-free data transfer capabilities. Along with two USB 3.0 ports, the top panel of the Sharkoon TK5M RGB ATX case also includes a USB 3.2 Gen 2 port. With a speed of up to 10 gigabits per second, its data transfer speed that is up to two times faster than Gen 1, along with seamless connection to mobile devices.

Its protruding front bezel with rounded corners gives the TK5M RGB a modern yet classic look. It also features an included RGB controller , allowing you to synchronize the lighting of the four pre-installed fans for an immersive display behind the tempered glass side panel. Internal cable management, along with the power supply tunnel and removable dust filters, helps maintain a tidy appearance and improves airflow by minimizing obstructions.

Despite its compact size, the TK5M RGB ATX case can accommodate larger hardware . The maximum graphics card length is 31 cm, or 33,5 cm with the front fan removed. A power supply up to 17,5 cm long and a CPU cooler up to 15,7 cm tall can also be installed. There's space for two 3,5-inch hard drives in the bottom HDD/SSD bay, or two 2,5-inch SSDs inside and above the case. Two more SSDs can be installed next to the motherboard tray, and a fifth in the power supply tunnel, providing ample storage capacity and flexibility.